Integration of a wearable mobile mapping solution and advance numerical simulations for the structural analysis of historical constructions: a case of study in San Pedro church (Palencia, Spain)
IDENTIFICADOR UNIVERSAL: http://hdl.handle.net/11093/2829
VERSIÓN EDITADA: https://www.mdpi.com/2072-4292/13/7/1252
MATERIA UNESCO: 3305.32 Ingeniería de Estructuras ; 3305 Tecnología de la Construcción ; 3305.33 Resistencia de Estructuras
TIPO DE DOCUMENTO: article
This work aims at enhancing the current methodologies used for generating as-built CAD models suitable for advanced numerical simulations. To this end, this paper proposes the use of a wearable mobile mapping system that allows one to improve the digitalization stage in terms of flexibility and time required. The noise showed by the resulting point cloud, based on the simultaneous location and mapping (SLAM) solution, demands a post-processing stage that introduces the use of a parameter-free noise reduction filter. This filter improves the quality of the point cloud, allowing for the adjustment of surfaces by means of parametric and non-parametric shapes. These shapes are created by using reverse engineering procedures. The results showed during this investigation highlight a novel application of this sensor: the creation of as-built CAD models for advanced numerical simulations. The results of this investigation are complemented by a valuable contribution with respect to the use of an advanced restoration solution, by means of textile reinforced mortar. To this end, the CAD model is used as the geometrical base for several numerical simulations by means of the finite element method. All this procedure is applied in a construction with structural problems.
Ficheros en el ítem
- SánchezAparicio_LuisJavier_202 ...