Enhanced corrosion resistance of recycled aluminum alloy 6061 chips using hot extrusion followed by ECAP
DATE:
2019-09-24
UNIVERSAL IDENTIFIER: http://hdl.handle.net/11093/3772
EDITED VERSION: https://www.hindawi.com/journals/jchem/2019/3658507/
UNESCO SUBJECT: 3303 Ingeniería y Tecnología Químicas ; 3303.07 Tecnología de la Corrosión ; 2210.05 Electroquímica ; 3312 Tecnología de Materiales
DOCUMENT TYPE: article
ABSTRACT
The oxidation of aluminum machining chips retards the successful recycling through the conventional remelting route. A promising approach to overthrow this problem is the utilization of solid state recycling in converting aluminum machining chips directly into semifinished products to eliminate the cost of the remelting process and reduce CO2 emissions. Therefore, in recent work, chips of aluminum alloy (AA6061) were recycled by compaction and then extrusion conducted at 500°C, followed by equal channel pressing (ECAP) to study the resultant material properties and its microstructure. Moreover, the present investigation explores the influence of ECAP after hot extrusion on the corrosive behaviour of the recycled samples in saline solution (NaCl) by electrochemical impedance spectroscopy (EIS) and linear polarization (LP). The results demonstrated a remarkable enhancement of the recycled chips’ properties subjected to hot extrusion followed by the ECAP process. Furthermore, the successive ECAP passes leads to increased film thickness and decreased corrosion rate